347-577-3033
Contact Us

VertexBooth Tutorials

Step-by-step guides for setting up, configuring and running VertexBooth. Start with the setup series, or search for the exact thing you are stuck on.

Start Here

Set up your first booth

Three tutorials, about 20 minutes total, and you have a working booth.

STEP 1

How to Set Up Your First Booth Profile

A profile is the entire booth. Here is how to create one properly, what to duplicate rather than build, and which settings do not travel with it.
8:40
STEP 2

How to Connect a Canon Camera to VertexBooth

Set the camera up, plug it in, and point VertexBooth at it over USB, plus the two settings that cause most camera problems.
STEP 3

Turn Off Test Mode Before Your First Real Event

A booth in test mode looks perfectly normal and takes no money, prints nothing and photographs a test card. Here is how to spot it and what to check before an event.
All Tutorials

Browse by topic

Short answers where a short answer will do. Full walkthroughs where it will not.

Getting Started

🎬

How to Set Up Your First Booth Profile

A profile is the entire booth. Here is how to create one properly, what to duplicate rather than build, and which settings do not travel with it.
Walkthrough6 min
🧪

Turn Off Test Mode Before Your First Real Event

A booth in test mode looks perfectly normal and takes no money, prints nothing and photographs a test card. Here is how to spot it and what to check before an event.
Walkthrough6 min

Cameras & Capture

📷

How to Connect a Canon Camera to VertexBooth

Set the camera up, plug it in, and point VertexBooth at it over USB, plus the two settings that cause most camera problems.
Walkthrough8 min

Screens & Design

Printing

🖨️

Why Are My Photo Booth Prints Coming Out With a White Border?

A white edge almost always means the print design and the loaded paper are different sizes. Here is how to find the mismatch.
Quick Answer3 min

Payments

💳

How to Take Card Payments on Your Photo Booth

Turn on charging, choose the right reader, decide when guests are billed, and prove it works before you leave the booth at a venue.
Walkthrough12 min

Unattended Kiosk

🔒

How to Lock Down a Booth You Leave on Its Own

Start the booth automatically, keep guests out of your settings, and know the way back in. Including the switch that does nothing until you set a password.
Walkthrough8 min

Sharing & Delivery

Troubleshooting